Beka Frosted 8mm Glass Walk in shower enclosure with Tie bar and Return Glass
Includes universal 45mm low profile stone resin shower tray (can be fitted left or right hand)
Covered by manufacturers lifetime guarantee
Includes main front panel with small return panel
Included: Front Panel, Return Panel, Shower Tray and Brace/Tie Bar
Glass Thickness: 8mm
Shower Enclosure Height excluding tray: 1850mm
Tray Height: 45mm
Total Height: 1895mm
Front Panel: 900mm
End Panel: Optional
Small Return: 220mm
Shower tray waste position can vary dependent on the size of the tray. If you require the waste position in a specific position on the tray please contact us prior to purchase.
Why not add the Showerguard Kit, Waste and/or the Leg Set Panel Kit from the top right hand side of this page?
Showerguard Anti Smear, Limescale, Easy Clean Glass Solution
How does it work?
The showerguard product contains minute molecules of silicon dioxide. On application and within seconds, these molecules fuse with the silicon dioxide in the glass. A chemical reaction then creates a "low energy" surface. This finish, generally known as "non-stick", creates a surface to which contaminants will be less able to stick to, and hence run off the glass within the water droplets.
The chemical bond or fusion between the coating and the glass is permanent, and after 24 hours becomes completely inert. Showerguard will make cleaning easier, and less frequent. Any suitable non-abrasive cleaner can be used, the coating will not be damaged. The 30ml bottle will easily cover 3 metres of glass when used sparingly.